{"id":9156,"date":"2026-08-25T06:42:50","date_gmt":"2026-08-25T14:42:50","guid":{"rendered":"https:\/\/fursone.com\/jacquard-knit-vs-cable-knit\/"},"modified":"2026-09-25T00:27:04","modified_gmt":"2026-09-25T08:27:04","slug":"jacquard-knit-vs-cable-knit","status":"publish","type":"post","link":"https:\/\/fursone.com\/da\/jacquard-knit-vs-cable-knit\/","title":{"rendered":"Jacquardstrik vs. snoningsstrik: M\u00f8nstermuligheder sammenlignet"},"content":{"rendered":"

Jacquard Knit vs Cable Knit: Pattern Capabilities Compared<\/h1>\n

Jacquard and cable knit both produce patterned fabric, but they do it in completely different ways. One weaves colour and design into the knit; the other builds texture from raised stitches. If you are choosing a fabric for a brand, the right answer depends on the pattern, the yarn, and the production cost. This guide compares the two.<\/p>\n

\"jacquard<\/figure>\n

The jacquard vs cable decision is a weight, cost and setup call on a knit fabric manufacturer<\/a> run.<\/p>\n

How jacquard works<\/h2>\n

Jacquard uses a jacquard mechanism on the machine to select individual needles and weave in different yarn colours, so a multi-colour figure or motif is knitted into the fabric rather than printed on top. The result is a crisp, all-over pattern that runs through the fabric and does not wash off. It is the route for logos, geometric patterns, and intricate motifs that need to be integral to the cloth.<\/p>\n

\"cable<\/figure>\n

How cable knit works<\/h2>\n

Cable knit creates raised, twisting columns by crossing knit stitches over each other. It is a texture, not a colour pattern, so the design comes from the stitch structure. A cable knit reads as dimensional and warm, and it works best in a single colourway where the raised pattern does the talking.<\/p>\n

\"knit<\/figure>\n

Weight, cost and garment fit<\/h2>\n

Jacquard tends to use more yarn because every row uses the pattern yarns, so it is often heavier and costs more. Cable knit uses the base yarn throughout, which means a lighter weight and usually a lower cost. On a controlled line like Fursone, knit fabric builds across 150–450 gsm, so both can be tuned to the target weight, but the jacquard version typically needs a higher budget per metre.<\/p>\n

Production and sampling on a real mill<\/h2>\n

Both are machine-driven, but jacquard needs more setup because the pattern has to be programmed. That raises sampling cost and lead-time. Cable knit is a repeat pattern that a mill can run quickly. On the Fursone side, hand-loom and panel samples run 7–10 days, and every batch is tested before dispatch, which is where the quality system comes in; you can read the basis on the BSI ISO 9001 quality management<\/a> page.<\/p>\n